|
| Brand Name: | LEADRAY |
| Model Number: | LRC-H100W |
| MOQ: | 10 Pieces |
| Price: | USD 45-260 / Piece |
| Delivery Time: | 7-15 days for stock models, 20-30 days for OEM orders |
| Payment Terms: | T/T, L/C, Western Union |
Some sites need a lamp that can be tuned after installation, not just switched on. This LRC-H100W variant ships with a 2.4G remote, so brightness levels, working hours and motion profiles can be adjusted from the ground. Underneath the convenience is the same hardware: 112 5050 LEDs at 18,000 lumens, a 120W panel, a 12.8V 55Ah LiFePO4 battery and an IP65 aluminium shell. It suits car parks, factory gates and residential roads where lighting needs change with the season.
| Parameter | Specification |
|---|---|
| Model | LRC-H100W |
| Rated Power | 100W |
| Luminous Flux | 18,000 Lm |
| PV Panel | 120W 18V Monocrystalline |
| Battery | 12.8V 55Ah LiFePO4 |
| LED Quantity | 112 pcs 5050 |
| Control | 2.4G Remote + PIR Sensor |
| Light Sensor | Auto On at 30 Lux |
| Mounting Height | 8-10 m |
| Pole Spacing | 30-40 m |
| Full / Dim Runtime | 13 h / 42 h |
| Protection | IP65 |
We are a solar outdoor lighting maker in Shenzhen, established in 2005, employing 300-500 people, with 80-90% of sales going to export markets. Street lights, garden lights and wind-solar hybrids are our whole catalogue, so the factory is set up around outdoor fixtures rather than a bit of everything.
The process is fairly simple to describe: incoming material inspection, SMT, module assembly, aging test, then a final quality check with the lamp powered on. Original 5050 LEDs, Grade A LiFePO4 batteries and high-efficiency panels are standard, not upgrades. Every unit is tested for waterproofing and wind load before it earns a carton.
OEM and ODM are both welcome, covering logo, CCT, packaging and control functions. Our engineers have supported road, campus, car park and rural electrification projects across Africa, the Middle East and South America, and they will happily review your layout before you commit to a wattage.
Feedback collected from project contractors and distributors who have installed this series.
“We manage a 300-bay staff car park. Being able to dim to 40% after midnight from the remote cut complaints about glare and still kept the area safe for shift changes.”
Facilities manager · Aqaba, Jordan
“The remote pairing took two minutes per lamp. On the previous brand we needed a laptop and a cable for every firmware tweak.”
Installation contractor · Curitiba, Brazil
“Motion response is quick enough that you notice the light before you notice the sensor. That matters on a security perimeter.”
Security systems integrator · Nairobi, Kenya
| QUESTION | ANSWER |
|---|---|
| How many lamps can one remote control? | One remote can pair with multiple lamps of the same series. Each lamp keeps its own stored profile, so you can program a batch with a single handset. |
| Does the PIR work in heavy rain? | The sensor is sealed behind an IP65 window and uses filtered logic to ignore rain and foliage movement. Sensitivity can be lowered from the remote. |
| Can the lamp run without the remote? | Yes. Factory defaults are dusk-on, dawn-off with motion boost, so it works out of the box even if the handset is lost. |
Tell us the site type and operating hours, and we will pre-program the lighting profile before shipment.
