Riyadh is the core city of Saudi Arabia, with a large number of newly built residential areas and industrial parks continuously expanding outward. Many new districts have long installation cycles for supporting pipelines, and some peripheral roads and secondary branches are far away from the municipal power grid, resulting in high costs for connecting to the municipal power grid. The local climate is mainly hot and dry, with ample sunshine during the day, making it very suitable for solar powered lighting. 80-100W belongs to the golden power range that balances brightness, range, and budget, perfectly adapting to internal roads, park loops, parking lots, and logistics channels in Riyadh residential areas.

As a source street lamp factory, LEADRAY specializes in optimizing 80-100W solar street lamps for the high-temperature desert environment in Saudi Arabia, providing a stable and durable complete lighting solution for local engineering and general contractors without the need for complex wiring, reducing project construction and long-term operation and maintenance costs.

To adapt to the high temperature, drought, and strong sandstorm conditions in Riyadh, LEADRAY has made multiple customized upgrades for 80-100W street lights to combat desertification.
The first is to optimize the heat dissipation structure. The lamp body and battery compartment adopt independent insulated air ducts to reduce the heat accumulation caused by direct sunlight, protect the lithium iron phosphate battery and driving power supply, and avoid high-temperature shutdown. The battery is selected with high temperature resistance, specially adapted to the prolonged high temperature environment in Saudi Arabia during summer, to slow down capacity decay and extend its service life.

The second is a high sealing, dustproof, and waterproof design, with an IP66 protection level. Compared with ordinary IP65, it can better prevent fine sand from entering the interior of the lamp body, and at the same time, it can resist the occasional rainstorm, reducing the risk of condensation and short circuit.

The photovoltaic panel is made of high transparency tempered glass, which is resistant to wind and sand scratches, and has an anti fouling coating on the surface. It is not easy for sand and dust to adhere, and the maintenance cycle is longer.
The third is intelligent dimming and endurance strategy. We set up a program based on Riyadh sunshine data to efficiently charge during the day; Supports multiple dimming levels, and can maintain stable lighting even on rainy or cloudy days for 3-5 consecutive days. Many local projects require lighting up all night, and this strategy can stably meet the demand.

The surface of the lamp body is coated with anti ultraviolet paint, which is not easy to fade or peel after long-term exposure to sunlight, maintaining the overall beauty of the park and community.

Most residential areas in Riyadh are enclosed Compound communities with spacious internal roads and frequent private car traffic. Residents have high requirements for comfortable and even nighttime lighting; At the same time, the park emphasizes overall aesthetics, with uniform appearance of lighting fixtures that match the design tone of high-end communities. The industrial park scene is more diverse, including freight channels, large outdoor parking lots, fenced security trails, and employee commuting roads, with trucks and construction vehicles passing back and forth, requiring higher requirements for lighting distance and illumination stability.

The Saudi desert environment has unique challenges: extremely high surface temperatures in summer, prolonged exposure to sunlight can accelerate battery degradation and drive power burnout; Large sandstorms can easily adhere to the surface of photovoltaic panels, reducing power generation efficiency; The temperature difference between day and night is huge, and ordinary lamps with poor sealing are prone to condensation, causing internal circuit failures.

The municipal power plan still has obvious shortcomings here: the approval cycle for power grid expansion is long, the amount of cable laying work is large, and the difficulty of excavation and construction in desert areas is high; The electricity bill will continue to be generated in the later stage, and the long-term electricity cost of large parks should not be underestimated. Many projects will also be equipped with security requirements, hoping that street lamp locations can also accommodate monitoring and reduce the investment in separate security poles. 80-100W solar street lights are perfectly suited for these medium to large roads, avoiding the various troubles of mains power solutions, and are increasingly favored by local municipalities, developers, and park managers in Saudi Arabia.

Why choose the power range of 80-100W?
Styles below 80W are more suitable for narrow walkways and pedestrian paths in residential areas; Products with a power output of over 100W have higher single lamp costs and are suitable for urban main roads. The main roads and industrial park ring roads in Riyadh residential areas are mostly 5-7 meters wide, and 80-100W is the most cost-effective choice.
The 80W version is suitable for two-way lanes within residential areas, logistics paths within the park, and employee parking lots. The recommended lamp post is 5-6 meters long, with soft and uniform light that does not glare or interfere with residents' bedroom windows. It supports dimming strategy, with full power during peak pedestrian flow and reduced power for energy saving in the second half of the night.

The 100W version is suitable for the main ring road of industrial parks, truck passages, and large community entrances and exits. The lamp post is 6-7 meters long, with a wider lighting angle and higher illumination, meeting the safety requirements for large vehicles passing through at night and facilitating security personnel to patrol at night.

LEADRAY offers two types of structures: integrated and split. The integrated style has a simple and neat appearance, which is very suitable for high-end residential areas that value appearance; Split type can raise and adjust the tilt angle of photovoltaic panels, avoiding building shadows and making dust cleaning more convenient. It is commonly used in industrial park projects. Both specifications support optional built-in monitoring cameras, integrating lighting and security, and achieving dual functionality at one point.

The Saudi project has strict requirements for documents, certificates, and delivery standards. As the source factory, LEADRAY can provide a complete set of technical documents, test reports, origin information, and cooperate with local customs clearance and project acceptance.

After receiving the customer's road drawings, lighting points, and pole height requirements, our engineers provide free lighting plans and power layout suggestions, calculate the configuration of photovoltaic panels and batteries, and avoid waste caused by insufficient or excessive configuration. Whether it is the batch lighting of enclosed residential areas or the overall supporting projects of large industrial parks, production can be scheduled and delivered in batches according to project progress.

We support customization of color temperature, dimming mode, remote monitoring system, logo printing, and matching lamp post styles. Engineering companies can choose between pure lighting or lighting+monitoring integrated models, which can be matched according to their needs.

At the construction level, solar street lights do not require excavation and wiring, and can be fixed with poles, resulting in higher construction efficiency on desert sites, significantly shortening the construction period, and reducing earthwork costs. After completion, there will be almost zero electricity bills, and the long-term operating costs will be very low, which is very in line with Saudi Arabia's policy direction of promoting new energy and energy conservation and cost reduction.