40W Smart Solar Street Light: IP65 Waterproof + PIR Sensor + APP Control, the All-Round Choice for Outdoor Lighting

The Leadray 40W integrated solar LED street light combines high efficiency, energy saving, intelligent control, and robust protection.

With its core advantages such as PIR human body sensing, APP remote control, and IP65 waterproofing, it is the preferred solution for outdoor lighting scenarios, providing a stable and bright lighting experience for courtyards, roads, and public areas.

(1) Core Performance Parameters: Dual Guarantee of Power and Battery Life

Lighting Core: Equipped with a 40W high-power LED light source, using Philips brand-customized LED chips, with a luminous efficacy of 180-210lm/W, it can output pure white light (commonly 6500K daylight white), providing uniform and transparent light with a wide coverage area, easily meeting the lighting needs of roads, courtyards, and other scenarios. The LED lifespan exceeds 50,000 hours, with light decay of less than 3%, ensuring stable performance over long-term use.

Power Supply System: Equipped with a high-efficiency monocrystalline silicon solar panel, it boasts a high energy conversion rate. Combined with an MPPT intelligent controller, it can be fully charged in 6-8 hours, with charging efficiency far exceeding that of ordinary solar lights.

Built-in high-capacity lithium iron phosphate battery (LifePO4), offering excellent safety performance, high temperature resistance up to 60℃ or higher, and over 2000 charge/discharge cycles. It supports continuous operation for 2-3 consecutive cloudy/rainy days without worrying about power outages.

Protection Rating: Meets IP65 waterproof and dustproof standards. The lamp housing is made of 6063 die-cast aluminum, treated with anti-oxidation and anti-corrosion coating. It boasts high hardness, rapid heat dissipation, and resistance to harsh outdoor environments such as heavy rain, sandstorms, and humidity. Even after long-term exposure, it is not easily damaged and is suitable for various climate conditions.

(2) Intelligent Function Highlights: Dual Convenience of Sensing + Remote Control

PIR Human Body Sensing Technology: Built-in high-sensitivity infrared motion sensor with a detection angle of 120°-150° and a maximum detection distance of approximately 8 meters, accurately detecting human or vehicle movement. Upon triggering, it automatically switches to 100% full-power lighting; when unattended, it maintains a 30% low-power energy-saving mode, ensuring lighting needs are met while significantly saving electricity, and also serving as a security warning (the sensor light automatically turns off after 1 minute of continuous illumination, adjustable via settings).

Dual control via APP and 2.4G remote: Supports remote control via a mobile APP, allowing users to turn lights on and off, adjust brightness, set lighting duration (e.g., 6-12 hours of timed illumination), and switch operating modes at any time, eliminating the need for on-site operation and offering convenience and efficiency. It also comes with a 2.4G wireless remote control, providing 360° signal transmission without dead zones.

One remote can control multiple lights in the same area simultaneously, suitable for batch installation scenarios (such as residential communities or parks) for unified management.

Multi-mode Adaptive: Multiple preset lighting modes are available – sensor mode (lights on when someone is present, energy-saving when no one is present), constant-on mode (continuous full-power lighting at night), and intelligent brightness mode (dim brightness throughout the night + sensor-enhanced illumination). These modes can be flexibly switched according to usage scenarios (such as courtyard security, continuous road lighting, garden ambient lighting) to adapt to different needs.

(3) Installation and Applicable Scenarios: No Wiring Required + Multi-Scenario Adaptability

Convenient Installation Design: Adopting an integrated structure, it eliminates the need for complex wiring, saving construction costs and time. The lamp holder can be adjusted 150°, supporting wall mounting, pole mounting (compatible with standard 8-meter lamp poles), ceiling mounting, and other methods. Whether fixed to a wall, lamp post, or under the eaves, the lighting direction can be easily adjusted to meet different lighting needs. Full-scene coverage: Ample lighting power and wide coverage, suitable for various outdoor scenarios:

Private scenarios: Courtyards, gardens, villa driveways, balconies, and perimeter security lighting;

Public scenarios: Community roads, park trails, parking lots, basketball courts, and fitness areas;

Engineering scenarios: Rural roads, industrial parks, scenic trails, and billboard lighting, combining practical lighting with security warning functions.

(4) Product advantages and after-sales service: Worry-free, durable, and guaranteed.

Core advantages: Zero electricity consumption (solar power), no wiring required, intelligent energy saving (induction + low power mode), ultra-long lifespan (2000+ battery cycles, 50,000 hours LED), convenient dual control (APP + remote control), and high overall cost-effectiveness.

After-sales guarantee: Provides a 3-year warranty service, covering the main body of the lamp, battery, solar panel, and other core components. Daily maintenance is minimal; only periodic cleaning of the solar panel surface is required (to ensure charging efficiency), making it more worry-free to use.

This Leadray 40W smart solar street light perfectly balances lighting performance, ease of use, and durability through a combination of efficient power supply, intelligent control, and robust protection. It is suitable for both home and outdoor use, as well as small-scale engineering lighting needs, making it an energy-saving, intelligent, and worry-free outdoor lighting solution.