Good price  online

products details

Created with Pixso. Home Created with Pixso. PRODUCTS Created with Pixso.
Outdoor Solar Lights
Created with Pixso. 40W Split Solar Street Light 6400Lm 210Lm/W PIR Motion Sensor Adjustable LED Module Parking Lot Lamp

40W Split Solar Street Light 6400Lm 210Lm/W PIR Motion Sensor Adjustable LED Module Parking Lot Lamp

Brand Name: LEADRAY
Model Number: LP1-40W
MOQ: 5 Sets
Price: USD 165-195 / Set
Delivery Time: 7 days for samples, 20-25 days for bulk orders
Payment Terms: T/T, L/C at sight, Western Union
Detail Information
Place of Origin:
Guangdong, China
Certification:
CE, RoHS, ISO 9001:2015
Rated Power:
40W
Typical Luminous Flux:
6400Lm
LED Light Effect:
210Lm/W
LED Quantity:
128 Pcs
LED Module:
Imported High-lumen Chips
PV Module:
MG MONO 36V 160W
Battery:
LiFePO4 25.6V 36Ah
Battery Management:
Built-in BMS With Overcharge And Thermal Protection
Control Mode:
PIR Motion Sensor, Time Control
CCT:
2700-6500K
Beam Angle:
90 / 75 / 150 Degrees
Module Tilt:
15-45 Degrees Adjustable
Product Dimension:
1099 X 761 X 65mm
Net Weight:
42.5kg
Pole Diameter:
89-105mm
Installation Height:
6-8m
Installation Distance:
35-40m
Rainy Day Backup:
3-5 Days
Protection Grade:
IP66
Working Temperature:
-20C To +60C
Warranty:
3 Years
Packaging Details:
Lamp head carton 1160x825x225mm (40kg), bracket carton 395x405x310mm (8.5kg), plywood pallet for sea freight
Supply Ability:
1200 Sets per Month
Highlight:

Adjustable Module 15 To 45 Degree

,

Split Design Panel Faces The Sun

,

Add Module For Two Way Light

Product Description
LEADRAY · LP1 SPLIT SERIES

LP1-40W Split Solar Street Light – 6400Lm, 210Lm/W

Model LP1-40W · 1099mm head · adjustable module 15-45 degree

The LP1-40W is a split-type solar street light for parking lots, squares, park paths and factory service roads. The solar panel, battery box and lamp head are separate parts, which lets the panel face the sun while the head aims at the ground. Each LED module can be tilted between 15 and 45 degrees, and a second module can be added underneath to light both sides of a lane from one pole.

Technical Parameters

Rated Power40W
Typical Luminous Flux6400Lm
LED Light Effect210Lm/W
LED Quantity128 pcs imported high-lumen chips
PV ModuleMG MONO 36V 160W
BatteryLiFePO4 25.6V 36Ah, built-in BMS
ControlPIR motion sensor + time control
CCT / Beam Angle2700-6500K / 90°, 75°, 150°
Rainy Day Backup3-5 days
Product Dimension1099 × 761 × 65 mm
Net Weight42.5 kg
Pole Diameter / Height89-105mm / 6-8 m
Installation Distance35-40 m

How We Build It – Factory Capability

The LP1 series runs on three dedicated assembly lines in our 30,000 square meter lighting plant, with a monthly output of about 1,200 sets for this series. Cells are sorted and matched before pack assembly, every BMS is calibrated on a bench fixture, and each finished fixture spends 48 hours in the aging room under full load. Before packing, a rain test at IP66 level is run on every batch, and the packed carton goes through a 60cm drop test. Twelve inspection points are recorded on the traveler card that ships with the goods.

FAQ

Q: Can the lamp head be mounted without the pole?
A: Yes. The head is supplied with a bracket for 89-105mm poles; for wall or parapet mounting we supply an L-plate at no extra cost, just tell us the fixing surface.
Q: How do you size the battery for 3-5 rainy days?
A: From your local sunshine hours and required lux on the ground. We set the PIR profile in the factory and confirm the autonomy with a full discharge test before shipment.
Q: Is a second LED module available?
A: Yes. A bottom module can be added for two-way lighting, sharing the same controller and battery pack. Order the dual-module version if both sides of the road need light.