When many customers come to us for open space lighting, their first reaction is that ordinary street lights do not cover enough. High pole lights are a practical solution for large unobstructed areas such as sports fields, large park parking lots, and distribution squares that require even illumination and no large dark areas.

This set of photos is the landing site of our recently completed high pole lights, including night lighting photos and the entire process of hoisting construction. LEADRAY high pole floodlights can be flexibly matched with the number of lamp heads and single lamp power, suitable for sports fields, factory parking lots, logistics yards, and park squares. We not only sell lamps, but also follow up with the project from scheme calculation, lamp body structure, on-site installation suggestions, to supporting protective configurations, helping contractors avoid the pitfalls often encountered in large-scale lighting: uneven illumination, glare, easy loosening of lamp heads, and tedious maintenance in the later stage.

Whether it's the mains version, it can also be changed to a solar high pole solution as needed. Many overseas customers also use this in sports fields and market squares in Africa and Southeast Asia.

The core advantage of high pole lights is that after the height of the lamp post is raised, the range of light distribution is wider, without the need to densely distribute many lamp posts. The site looks clean and open, and it also reduces the cost of foundation construction and pole installation.

The most common ones are sports fields: basketball courts, badminton courts, and small football fields. Like the stadium project in the picture, the multi lamp heads are arranged in a circular pattern, and the light is evenly distributed from above to the field, without the situation of one side being particularly bright and the other side being black. When playing, the line of sight is comfortable, the glare is well controlled, and it will not shake the athletes' eyes.

The second high-frequency scenario is a large park parking lot and a centralized parking area for non motorized vehicles, just like the first night shot. Electric vehicles and small cars are centrally parked in the park, and sufficient brightness is required at night to ensure anti-theft and safe passage. A single high pole light can cover the entire parking area, which is much more worry free than installing many scattered low street lights.

In addition, this product is often used in town market squares, factory freight yards, bus hubs, and scenic area distribution spaces.
Many customers may be confused: Can ordinary street lights work? If the site is open and requires a large coverage radius, the illumination distance of low street lamps is limited, and there are many lamp posts to be erected, the combined cost of foundation, pipelines, and labor is actually higher. High pole lights are suitable for large-span lighting, achieving full site illumination with fewer points.

Our high pole lamp has a circular bracket layout for the lamp head, and the angle of the lamp head can be adjusted separately. When hoisting, the construction master can adjust the irradiation direction of each projector in advance. After landing, there is no need to climb up and adjust repeatedly, which saves much time for on-site construction. The lamp head adopts a thickened die cast aluminum shell, with solid heat dissipation, and is not easily affected by light decay when lit continuously for a long time.

Many overseas customers may ask about wind resistance, and we will conduct structural calculations based on local wind speeds during the planning phase. The lamp post is made of thickened galvanized steel pipe, which is hot-dip galvanized for corrosion protection both inside and outside, and then sprayed with plastic on the surface. It can also be used in coastal and rainy and humid areas to strengthen the anti-corrosion version. All fixing bolts are made of stainless steel, which is not easy to rust and get stuck, making it more convenient for later maintenance and replacement of lamp heads.

The power matching is very flexible: a single lamp head can choose 100W, 150W, 200W, 300W, and the number of lamp heads can be customized as 4, 6, 8, or 10. The stadium usually selects 6-8 light heads to control glare; Parking lots and squares can be freely combined according to the desired brightness.

There are two options to choose from: mains power, suitable for parks with stable power grids and convenient wiring; Solar powered high pole version, suitable for remote stadiums and rural squares without power grids. Many of our previous orders in Africa and Southeast Asia were for solar powered high pole stadium lights.

We are the source factory and can cooperate with both domestic projects and overseas orders for high pole lights.
If you have the site drawings, please send them directly to us and we will do a lighting simulation for you free of charge. We will show you the coverage effect of the light spot and the average illuminance, and confirm in advance whether the plan is suitable or not to avoid not meeting the requirements of Party A.

The complete set of materials can be provided: structural drawings, load verification, anti-corrosion testing, LED bead parameters, quality assurance documents, and export orders can be accompanied by customs clearance documents.

Support customization: pole height, number of lamp heads, power, color temperature LOGO； We can also provide a complete set of solutions for lifting high poles and solar high poles.
We can handle everything from samples, trial orders, to bulk container shipments. Many overseas engineering companies use this product for school stadiums, community squares, and large parking lot projects, and the feedback is relatively stable.

A conventional fixed high pole lamp like the one shown in the picture will be delivered with an installation manual and bolt accessory package, providing the on-site team with reference points for lifting and reducing the probability of installation errors.