leave a message
leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
Home

blog

blog

  • Things to know before installing the Integrated Solar Street Lights
    Sep 01, 2017
    Enough sunshine is important for any solar light to support normal working, there are 6 Tips you need to know for installing the integrated solar street lights as guidelines of installation. 1.Enough Sunshine for Working Integrated solar street lights could not work without sunshine, please select good quality integrated solar street light like Leadray brand which have high Solar conversion rate to have enough sunshine for the street light working. 2.Consider the application temperature when selecting the solar street light Control system will stop to charge Lithium Battery under 0°C, Our integrated solar street light adopts the long life Lithium battery for storing energy, charging temperature at day time is between: 0°C~+60°C,when temperature goes lower than 0°C ,the control system will stop automatically to protect the battery, and it will revive to charge the battery while temperature goes higher than 0°C. Discharging temperature at night is between: -20°C ~ +60°C, any ambient beyond will take damage to the battery. So please check these factors while selecting the street light. 3.Charge the battery after long time transportation or storage: Battery of the “All in One(integreated) solar street light” can be stored for 6 months period after fully charged. Therefore please examine and charge it periodically after long time transportation or storage to prevent damaging. 4.Make sure the integrated solar street light installed in a position that the solar light can get as much sunshine as possible: When install the lights in Northern Hemisphere, please adjust the solar panel to the South as much as possible to collect maximum sunshine radiation, while install them in Southern Hemisphere, By the same token, keep solar panel to north. At the same time please keep it away from any shadow of houses, trees etc. 5.Keep the solar panel clear: Keep the surface of the All in One solar street light clear with normal detergent to get maximum power generation, clear the dust or tree leaves or any grease. 6.Our All in one solar street lights got IP65 and passed the reliable tests Our all in one solar street lights can be used in the environment of seaside and desert.
    Read More
  • What is time control for Integrated Solar Street Light
    Dec 27, 2017
    Time control is one of the lighting modes that used in the integrated solar street light, it can also be used in the integrated solar garden light and integrated solar billboard light. We set up the data in the controller base on the requirement from customers or according to the practical application, after the integrated solar street light was installed and operated, it will work automatically according to the data we set up. For example: The default of our Leadray Integrated solar street light is “1227”. “1227” means we set up the light to be lit in 1 hour at 30% light on+2 hours at100% light on+ 2 hours at 50% light on+7 hours at 20%. That is to say the integrated solar street light start working from 6pm, and from 6pm to 7pm the street light has only 30% light on; then from 7pm to 9pm, the light will be full brightness(100% light on); From 9pm to 11pm, 50% light on; From 11am to 6am(the next day) 20% light on. The integrated street light will shift from one setting to another automatically(including on and off), we take this way (1hour+2hours+2hours+7hours) as a default because we think this meets the people's movement. But you can request another way like “2226”, just need to consider the power consumption. Welcome to visit our site: szleadray.com. Inquiry us for More!
    Read More
  • Why do we need the time control for integrated solar street light
    Sep 15, 2017
    1. Energy Saving: You don't need the integrated solar street light to be lit all night long from dust to dawn, especially after mid-night there is less people movement. 2. To extend the lighting hours and against the rainy day, if a solar street light lit with full brightness(100% power on) it can only work for 6 hours. But if we use the time control and set up the solar street light with some hours 100% brightness and some 30% and some 50%, etc. The solar street light can work more hours say like 12 hours( all night long). The solar street light must keep some power to against the rainy days. 3. As the integrated solar street light is powered by the solar, and the battery capacity is limited, we need to allocate the consumption of power. You may think that we can increase the capacity of the battery, if you do so, you need more batter units and bigger size of solar panel, in the end, the whole fixture will be larger and heavier which the poles can not stand, moreover, the cost increased definitely. If you are interested in integrating solar street lights, please visit our website> www.szleadray.com
    Read More
  • Integrated Solar Street Light With CCTV Camera
    Dec 01, 2017
    Integrated Solar Street Light with CCTV Camera is a new intelligent Solar Street Light Fixture with Monitoring System(CCTV IP Camera). Basically, the monitoring system will upload the signal to the cloud base by WIFI or 4G Sim Card. The users need to download the CAMHI APP on their photos to check or download the video or pictures. With built-in Web Server, support IE Browse and parameters setting. The system supports 6 users to monitor the IP camera at the same time. By using the APP on phone, the users can check the live video and record video, shoot a picture. 32G/64G/132G SD Card supported, Normally, a 32G SD Card keeps 7days record while 64G keeps 14days record and 138G keeps 30days record. IP Camera Data: 2 Mega Pixel 50°Monitoring Angle 5-10meters recommended monitoring distance 6mm Lens Size 1600*1200 Resolution ≥48dB SNR 24Hours Working Password protection Day and Night mode shift freely Street Light Data: Structure: Integrated(All in one) Power Supply: Solar Powered Solar Panel: 18V/80W; 18V/90W Charge time: 6-8hours Light Power available: 20W/30W Luminous Flux: 140Lm/W IP65 Mounting Height: 8-10M Poles diameter: 76-105mm Lighting model: PIR Sensor
    Read More
  • Why is Integrated Solar Street Light Becoming Popular
    Dec 15, 2017
    Integrated Solar LED Street Lights have gained a considerable amount of popularity in recently years. It’s no secret why. Energy Shortage is one of topics that we talked most in nowadays. Solar Energy is the way to go for the future. Integrated Solar Street Light integrated with Solar Panel, LED light sources, rechargeable battery and smart controller, etc. It does not require any electricity or wiring, plug and play, very simple installation and auto on and off. Below you will find the top four reasons why Integrated Solar Street Lights and other integrated Solar Lighting systems are rising in popularity. Environmentally Friendly More and more consumers are beginning to favor companies and retail stores that are kind to the environment. When businesses install integrated solar street light, they can show the lights to their customers, while also saving on energy costs. Stop Relying on Grid Power Natural disasters such as hurricanes, floods, strong thunderstorms can cause failure of power grids. Integrated solar lighting doesn’t depend on grid power. Power is Not Available In remote or rural regions a utility grid doesn’t exist or is very costly to acquire. Any area that is power less and could receive good sunshine can install the integrated solar street light. Some examples of these remote areas that may need lighting could include camping areas, remote hiking spots, mountainous terrain, and off-road sporting event arenas. Cut Costs Integrated solar street light is very easy and simple in installation, and they save a lot of installation cost comparing to the split type of solar street light or normal city power street light. City power street light need to do the wiring and the integrated solar street light does not need to do so, it saves these wiring cost as well.
    Read More
  • How to install the All In One Solar Garden Light
    Dec 28, 2017
    Leadray Optoelectronic Company produce All In One Solar Garden Lights available of 9W/15W/30W, Let’s show you below how to install the all in one solar garden light: Step One: Open the package and check if components are completed as follow: Step Two: Turn on the Switch before installation, Switch up is on and Switch down is off. Step Three: Place the all in one solar garden light to the top of the pole and fasten the screws. Special Note: When install the all in one solar garden light, please choose a position with enough sunshine and the light can get fully exposed. Do not install the all in one solar garden light within the shadow of a tree or wall so that the light can well receive the sunshine.
    Read More
  • Installation Operation for Integrated Solar Billboard Light
    Jan 05, 2018
    Packing accessories 1.With nut gasket screws M6X12------4PCS 2.With nut gasket screws M6X45------4PCS 3.With nut gasket screws M8X16------6PCS 4.With nut gasket screws M8X100-----10PCS 5.U-bolts M8 -----------------------4PCS 6.U-type reed board ----------------4PCS 7.Bracket -------------------------1PCS 8.5#Wrench ------------------------1PCS 9.6#Wrench ------------------------1PCS 10.M8Hexagon wrench ----------------1PCS How to Installation Operation for Integrated Solar Billboard Light 1, Fixed the bracket to the billboard with welding 2, Plus U-type reed reinforcement Fix the light source module and tie rod with 4PCS nuts with M6 * 45MM bolt kit as 2-1 Connect light source module female cable and inner frame male cable Use crane hanging the light. Attention: 1, Light source upwards 2, When hanging, keep smooth and steady 3, Cannot stand people under the crane with light As following pictures:4-1 Put down the light steady Take out the screw Pull the rod out to end Take 4PCS with M6X12 nut gasket bolts fixed as 4-2 As following picture(A1) Put the lamp holder into the mounting bracket Insert the M8X16MM bolts with nuts lock As following picture(A2) Use M8 * 16 bolts to fasten the support plate at both ends to connect the lamp and bracket Tips: 1, Before installing the fixture, it is necessary to evaluate whether the billboard steel structure can withstand the total weight of the lamp to be installed. 2, Whether the installation will affect the wind strength of the billboard. If it can not achieve the safe installation range, need to strengthen the billboard structure or strengthen the intensity of billboards.
    Read More
  • Installation Tips for All In One Solar Street Light
    Jan 17, 2018
    Important Installation Tips for All In One Solar Street Light 1.Open the package and check if component are completed as follow: 2.Turn on the switch before installation (Switch up is on and Switch down is off) 3.Preinstall parts Ⅰ、Ⅱ、Ⅲ according to the drawing. 4.Place the All In One Solar Street Light into to the tpop of pole, fasten the screws with special tools and ensure the light is firm. Note Special Notes When install the All In One Solar Street Light, please choose a position with enough sunshine and fully exposure. Please note the solar panel must be fully exposure, without any shelter. Lighting Mode PIR Motion Sensor Timer Control Note: Total lighting time is 12hours.
    Read More
  • How to Install the 4G SIM card in the CCTV camera of the All in one Solar Street Light
    Jan 29, 2018
    1.How to Install the 4G SIM card in the CCTV camera: Our All in one Solar Street Light with CCTV Camera has been selling well and getting popular since it launched. Especially because they are available for both WIFI and 4G SIM Card to connect the CCTV Camera. 4G option is very suitable for remote area. The first step of using the 4G option CCTV Camera is insert the 4G SIM Card in the camera. Now let’s see how to do it: (1)Make sure your SIM card is Mirco SIM Card (2)Unscrew the screws of the cover and take out the cover (3)Insert the 4G SIM Card carefully, and pay attention on the direction and match of the SIM Card. (4)SD Card, can be changed by a larger capacity SD Card (5) Put the cover back and screw it Article from all in one solar street light Manufacturer,szleadray.com.
    Read More
  • How to connect your mobile phone to the 4G Option CCTV Camera via WIFI
    Feb 13, 2018
    If you have bought a 4G option Solar Street Light with CCTV Camera, but how to connect your mobile phone to the camera via WIFI? Please follow the following steps: (This instruction is for fixture which has 4G+WIFI function, not suitable for fixture that does not have 4G function) (1) Use a laptop to connect the hot spot(MIFI****) of the fixture, then use the browser and login the website:192.168.100.1,input the code: admin; (By logging in this web, you can also manage the internet connection/setting.) (2) Set the WIFI intranet(as picture 2-1 shows)-> Internet Wi-Fi (as picture 2-2 shows) -> Add (as picture 2-3 shows) (It will show English words when your computer system is in English) (3) After adding, it will show all the hot spot around, you just need to choose and click the one you want to connect. (as picture 3-1 shows) (4) Input the code of the hot spot you have chosen, click apply. (As picture 4-1 shows ) (5) Click the WIFI that you are going to connect, click connect. (as picture 5-1 shows) (6) Connect successfully. (as picture 6-1 shows)
    Read More
  • New Solar Lights Launching
    Mar 16, 2018
    We, Leadray Optoelectronic, are going to launch new solar lights in the 123rd Canton fair during April 15th to 19th. Solar LED Bat Light Power available 15W/24W/36W Solar Flood Light Power options: 10W/20W/30W/50W/100W/200W Solar Apple Light Power options: 6W/9W/15W Welcome to contact us for products or visit our booth during the Canton fair. We will let you know our once we have the booth number.
    Read More
  • How to disassemble the Solar Street Light
    Jan 21, 2021
    When you promote our solar street light and you want to show the inside of the fixture to your customers and here we would like to show you how to disassemble the solar street light. First of all, Place the fixture on a flat table, pay attention on the solar panel and handle with care . Then have the tool ready: M4 & M5 Inner Hexagonal Socket Wrench. Unscrew the screws on the fixing base and bracket support with the M5 Wrench. Unscrew the screws on the Upper Aluminum housing on the top of the lamp with M4 Wrench, take out the upper aluminum housing with hands carefully. Take out the surface plate at a quarter position, loosen the male and female connectors of the wires of the solar panel and battery and switch. Take out the surface plate completely. And now it is all done.
    hot Tags : Solar street light
    Read More
1 2 8 9 10 11 12 13 14 19 20

leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
submit
Contact Us : sales@szleadray.com

Home

Products

whatsApp

contact