blog

• Installation Operation for Integrated Solar Billboard Light

  Jan 05, 2018

  Packing accessories 1.With nut gasket screws M6X12------4PCS 2.With nut gasket screws M6X45------4PCS 3.With nut gasket screws M8X16------6PCS 4.With nut gasket screws M8X100-----10PCS 5.U-bolts M8 -----------------------4PCS 6.U-type reed board ----------------4PCS 7.Bracket -------------------------1PCS 8.5#Wrench ------------------------1PCS 9.6#Wrench ------------------------1PCS 10.M8Hexagon wrench ----------------1PCS How to Installation Operation for Integrated Solar Billboard Light 1, Fixed the bracket to the billboard with welding 2, Plus U-type reed reinforcement Fix the light source module and tie rod with 4PCS nuts with M6 * 45MM bolt kit as 2-1 Connect light source module female cable and inner frame male cable Use crane hanging the light. Attention: 1, Light source upwards 2, When hanging, keep smooth and steady 3, Cannot stand people under the crane with light As following pictures：4-1 Put down the light steady Take out the screw Pull the rod out to end Take 4PCS with M6X12 nut gasket bolts fixed as 4-2 As following picture(A1) Put the lamp holder into the mounting bracket Insert the M8X16MM bolts with nuts lock As following picture(A2) Use M8 * 16 bolts to fasten the support plate at both ends to connect the lamp and bracket Tips: 1, Before installing the fixture, it is necessary to evaluate whether the billboard steel structure can withstand the total weight of the lamp to be installed. 2, Whether the installation will affect the wind strength of the billboard. If it can not achieve the safe installation range, need to strengthen the billboard structure or strengthen the intensity of billboards.

  hot Tags : All in one Integrated Solar Billboard Lights Solar Wall Light China Integrated Garden Lights

  Read More
• Installation Tips for All In One Solar Street Light

  Jan 17, 2018

  Important Installation Tips for All In One Solar Street Light 1.Open the package and check if component are completed as follow: 2.Turn on the switch before installation (Switch up is on and Switch down is off) 3.Preinstall parts Ⅰ、Ⅱ、Ⅲ according to the drawing. 4.Place the All In One Solar Street Light into to the tpop of pole, fasten the screws with special tools and ensure the light is firm. Note Special Notes When install the All In One Solar Street Light, please choose a position with enough sunshine and fully exposure. Please note the solar panel must be fully exposure, without any shelter. Lighting Mode PIR Motion Sensor Timer Control Note: Total lighting time is 12hours.

  hot Tags : ALL IN ONE SOLAR STREET LIGHT Installation Tips for All In One Solar Street Light All In One Solar Street Light installation

  Read More
• How to Install the 4G SIM card in the CCTV camera of the All in one Solar Street Light

  Jan 29, 2018

  1.How to Install the 4G SIM card in the CCTV camera: Our All in one Solar Street Light with CCTV Camera has been selling well and getting popular since it launched. Especially because they are available for both WIFI and 4G SIM Card to connect the CCTV Camera. 4G option is very suitable for remote area. The first step of using the 4G option CCTV Camera is insert the 4G SIM Card in the camera. Now let’s see how to do it: (1)Make sure your SIM card is Mirco SIM Card (2)Unscrew the screws of the cover and take out the cover (3)Insert the 4G SIM Card carefully, and pay attention on the direction and match of the SIM Card. (4)SD Card, can be changed by a larger capacity SD Card (5) Put the cover back and screw it Article from all in one solar street light Manufacturer,szleadray.com.

  hot Tags : All in one Solar Street Light with CCTV Camera ALL IN ONE SOLAR STREET LIGHT

  Read More
• How to connect your mobile phone to the 4G Option CCTV Camera via WIFI

  Feb 13, 2018

  If you have bought a 4G option Solar Street Light with CCTV Camera, but how to connect your mobile phone to the camera via WIFI? Please follow the following steps: (This instruction is for fixture which has 4G+WIFI function, not suitable for fixture that does not have 4G function) (1) Use a laptop to connect the hot spot(MIFI****) of the fixture, then use the browser and login the website：192.168.100.1，input the code: admin; (By logging in this web, you can also manage the internet connection/setting.) (2) Set the WIFI intranet（as picture 2-1 shows）-> Internet Wi-Fi (as picture 2-2 shows) -> Add (as picture 2-3 shows) (It will show English words when your computer system is in English) (3) After adding, it will show all the hot spot around, you just need to choose and click the one you want to connect. (as picture 3-1 shows) (4) Input the code of the hot spot you have chosen, click apply. (As picture 4-1 shows ) (5) Click the WIFI that you are going to connect, click connect. (as picture 5-1 shows) (6) Connect successfully. (as picture 6-1 shows)

  hot Tags : Solar Street Light with CCTV Camera

  Read More
• New Solar Lights Launching

  Mar 16, 2018

  We, Leadray Optoelectronic, are going to launch new solar lights in the 123rd Canton fair during April 15th to 19th. Solar LED Bat Light Power available 15W/24W/36W Solar Flood Light Power options: 10W/20W/30W/50W/100W/200W Solar Apple Light Power options: 6W/9W/15W Welcome to contact us for products or visit our booth during the Canton fair. We will let you know our once we have the booth number.

  hot Tags : Solar LED Bat Light Solar flood light Solar Apple Light

  Read More
• How to disassemble the Solar Street Light

  Jan 21, 2021

  When you promote our solar street light and you want to show the inside of the fixture to your customers and here we would like to show you how to disassemble the solar street light. First of all, Place the fixture on a flat table, pay attention on the solar panel and handle with care . Then have the tool ready: M4 & M5 Inner Hexagonal Socket Wrench. Unscrew the screws on the fixing base and bracket support with the M5 Wrench. Unscrew the screws on the Upper Aluminum housing on the top of the lamp with M4 Wrench, take out the upper aluminum housing with hands carefully. Take out the surface plate at a quarter position, loosen the male and female connectors of the wires of the solar panel and battery and switch. Take out the surface plate completely. And now it is all done.

  hot Tags : Solar street light

  Read More
• Integrated Solar Street Light Advantages

  Jan 21, 2021

  Integrated Solar Street Light Advantages All in one, Integration design, easy to delivery Easy to install, no technician required. Just screw it on the pole Powered by solar, Green, environmental protection, energy saving Aluminum alloy profile, rainproof, safety, rust prevention, anti-corrosion Easy to maintain and replacement High efficiency Lithium battery, long lifetime With motion sensor, light on when people pass through, light dark when people pass away, energy saving

  hot Tags : Integrated Solar Street Light

  Read More
• How Does a Solar Street Light Work

  Jan 21, 2021

  Solar Street Light works on the principle of solar cells. Solar cells which is on the top of the fixture absorb solar energy during the day. The solar cells then convert the solar energy into electrical energy which is stored in battery. The battery is placed inside the fixture. During night time the solar street light starts automatically and consumes the energy already stored in the battery. During day time the battery gets recharged through solar power and the process keeps on repeating. Solar Street lights are composed of LED lights. LED requires very little current hence solar panels of smaller sizes are required for solar street light with LED. Where you can install a Solar street light? Roadway, Garden, Park, School campus, Rural Street, etc

  hot Tags : Solar street light solar street light with LED

  Read More
• How does Motion Sensor on Solar Street Light Works

  Aug 22, 2018

  During night time: If there is motion near the solar street light as detected by Motion Sensor, all LED will glow with 100% brightness. If there is No motion then 70% LED’s will go off and 30% LED’s will glow resulting in higher backup and energy saving.

  hot Tags : Solar street light

  Read More
• What Diameter Of Poles That Match Our Solar Lights

  May 14, 2018

  Thank you for choosing our Leadray Solar Lighting Products, you may want to know what diameter of poles that match our All in one solar street light and integrated solar garden light. Please check out below data of the poles’ diameter: Two Solar street lights installed in one pole LRC05W: Diameter of top pole area: φ20-30mm LRC08W: Diameter of top pole area: φ45-90mm LRC12W: Diameter of top pole area: φ45-90mm LRC15W: Diameter of top pole area: φ60-110mm LRC20W: Diameter of top pole area: φ60-110mm LRC25W: Diameter of top pole area: φ76-110mm LRC30W: Diameter of top pole area: φ76-110mm LRC40W: Diameter of top pole area: φ76-110mm LRC50W: Diameter of top pole area: φ76-110mm LRC60W: Diameter of top pole area: φ76-110mm LRC80W: Diameter of top pole area: φ80-85mm LRC100W: Diameter of top pole area: φ80-85mm （80W/100W All in one solar street light installed） LRC-F15: Diameter of top pole area: φ60-110mm LRC-F20: Diameter of top pole area: φ60-110mm LRC-F30: Diameter of top pole area: φ60-110mm LRC-F40: Diameter of top pole area: φ60-110mm LRC-F50: Diameter of top pole area: φ76-110mm LRC-F60: Diameter of top pole area: φ76-110mm LGA09W: Diameter of top pole area: φ70-80mm LGA15W: Diameter of top pole area: φ70-80mm LGA30W: Diameter of top pole area: φ76-80mm (9W Solar Garden Light)

  hot Tags : Solar street light ALL IN ONE SOLAR STREET LIGHT Integrated solar garden light

  Read More
• How to distinguish between Monocrystalline Solar and Polycrystalline Solar?

  Jul 17, 2020

  When you are ready to purchase some solar products, you may want to choose the best solar panel. So do you know what you can do? There are two types of solar panel material in the market, one is Monocrystalline, and the other one is Polycrystalline. Normally, we will suggest more to our customers to choose Monocrystalline Solar when they ask for solar street light, because Monocrystalline will be more efficient. It can collect more sun power convert to electronics. How to distinguish between Monocrystalline Solar and Polycrystalline Solar? 1, Different Color. The typical monocrystalline panel will tend to have a darker black color, polycrystalline panels tend to have a blue color. 2, Silicon Shape. Monocrystalline panel silicon is not a regular square shape, but polycrystalline panel silicon is a regular square shape. Shenzhen Leadray solar light uses Monocrystalline panel, perfect quality and reasonable price. We have solar street lights, solar garden lights and so on. If you want to know more details, please contact me at: sales@szleadray.com More info please go to our website: www.szleadray.com

  hot Tags : solar street lights Solar Garden Lights

  Read More
• LED is a good choice

  Aug 17, 2020

  Do you know the advantages of LED? Let us study together! LED is very energy-efficient and environmental, because it contains no Toxic Mercury, Lead or other hazardous material. And LED has less CO2 than other normal lighting. LED is good for your health, it doesn’t emit UV light. And importantly, LED lights will not attract insects. LED has a high CRI, showing true color and is more stable. LED life span is longer than other lighting. The service life can reach 80,000 hours-100,000hours. LED is a completely safe light, only less than 36V DC safety voltage, there is no danger of electric shock. Shenzhen Leadray Optoeletronic Co., LTD. is a solar light company. All of our solar lights use LED as light sources. As a Solar lighting company specializing in Solar street light for 15 years, our products include Solar street light, Solar garden light, Solar flood light and Solar billboard light, etc. we'd like to take a chance to cooperate with you if possible.

  hot Tags : Solar street light solar light company solar garden light

  Read More