Nov 24, 2022
Shenzhen Leadray Optoelectronic Co., Ltd.
Leadray intelligent integrated solar street light：
1.“All in One solar street light ”
could not work without sunshine, please select the suitable model according to the local sunshine radiation and the annual total radiation. We suggest use the both AC and DC charging model in those places where lack of sunshine or have long-time rainy days.
2.“All in One solar street light” adopts the long life Lithium battery for storing energy, charging temperature at day time is between: 0℃~+60℃, when temperature goes lower than 0℃, the control system will stop automatically to protect the battery, and it will revive to charge the battery while temperature goes higher than 0℃.
Discharging temperature at night is between: -20℃~+60℃, any ambient beyond will take damage to the battery. So please check these factors while selecting the street light.
3.Battery of the “All in One solar street light” can be stored for 6 months long after fully charged.Therefore please examine and charge it periodically after long time transportation or storage to prevent damaging.
4.When install the lights in Northern Hemisphere, please adjust the solar panel to the South as much as possible to collect maximum sunshine radiation, while install them in Southern Hemisphere, By the same token, keep solar panel to north.
At the same time please keep it away form any shadow of houses, trees etc.
5.Keep clear of the surface of the All in One solar street light with normal detergent to get maximum power generation, clear the dust or tree leaves or any grease.
6.All in One solar street light have got the standard of IP65. The vents on the surface is designed for radiating. The materials are made of aluminum alloy which can survive in the environment of seaside and desert.
Company Profile: SZ Leadray was established in 2005, with its own land area of 68,000 square meters, which provides a strong guarantee for the production and supply of solar street lights.
Product Design
Integrated Structure: The product adopts an all-in-one design, integrating components such as solar panels, LED light sources, lithium iron phosphate batteries, and controllers.
This design is not only simple and fashionable but also convenient for installation and maintenance. For example, the LRC-H series has a modular design, and the battery can be easily pulled out for replacement or maintenance.
Unique Appearance: Some models of the LRC-H series have a unique fluorescent decoration design, and the color can be selected from green, red, blue, orange, etc., which can meet different aesthetic needs of the environment.
Performance Parameters
Solar Panel: Take the LRC-H120W model as an example, it uses a 36V 160W monocrystalline silicon solar panel with a service life of up to 25 years, which can efficiently convert solar energy into electrical energy. The solar panels of different models have corresponding power configurations to meet the power needs of different lighting scenarios.
Battery: Equipped with a lithium iron phosphate battery, which has the characteristics of high energy, long life, and environmental protection. For example, the LRC-H120W model has a battery capacity of 25.6V 921.6Wh, and the battery life can reach 8-10 years.
The battery protection system is at the military - grade level, with overcharge and over - discharge protection functions, and the number of battery charge - discharge cycles is more than 2000.
LED Light Source: The LRC-H120W model has a maximum power of 24V 120W, a light flux of 21600lm (typical value), a service life of 50,000 hours. It has a color temperature of 2700-6500K, a CRI of >75Ra, and a beam angle of 150x80°, which can provide high-brightness, high-quality lighting. The LED light source adopts a modular thermal design, which can effectively dissipate heat and ensure the stable operation of the light source.
Read More
IPv6 network supported.
