Integrated Solar Street Lights

• What is a reasonable solar street light body structure design

  May 26, 2017

  First of all, to solve the problem of solar LED lighting mainly relys on a reasonable structure of the lamp body design, a solution is to use 2-3mm thick aluminum plate, high-power LED directly installed in the aluminum plate, LED connected with a lead. Low-power LED can be used in accordance with the number of LEDs in the aluminum tombs on the aperture and LED diameter to do the same hole, and then set the LED inlaid with aluminum tombs, LED pins in the back of the aluminum plate. The lamp housing is also made of metal material, will be installed with LED aluminum plate and metal shell tightly assembled, so that the heat generated when the LED can be transmitted through the aluminum substrate to the metal shell, the metal shell exposed to the air, the heat can Through radiation and convection. LED chip luminous efficiency of the new energy LED lights can make the whole lamp efficiency of 801m / W or more, has the advantage of energy saving, and its reliability and service life will need to rely on packaging technology to further improve. At present, the new energy LED street lamp to promote the application of the bottleneck is not light efficiency, and in the light failure and reliability, high-power LED package on the new energy LED lights light failure and reliability plays a key role. All new energy LED street lamp products in the radiator design, can be roughly summarized as aluminum extrusion heat sink chip heat sink and heat pipe combined with the radiator. Which aluminum extrusion heat sinks are mostly solar LED lighting the appearance of the pieces, the advantages of this approach is the lower cost of the radiator, especially the development costs of mold more competitive. However, in the development of high-power products, the weight is a must pay attention to factors, because the lamp arm tolerance will be some restrictions, so in high-power products, the general use of chip heat sink, or the use of heat pipe The way heat dissipation. High-power LED for the production of outdoor lighting enclosure protection level are generally above IP65. If the housing is a nonmetallic (such as plastic) material, although the LED is connected to the aluminum substrate (MCPCB), if the heat on the aluminum substrate can not be effectively conducted to the surface of the shell, the accumulated heat will cause the temperature of the aluminum plate to rise sharply , Resulting in the temperature is too high, then increase the possibility of LED failure, resulting in LED light decline increased life shortened.

  hot Tags : china solar lights factory led solar street lights factory solar street light price list supplier

  Read More
• Solar powered roadway light factory in Shenzhe of China

  Jun 02, 2017

  We are factory for solar powered roadway light in Shenzhen of China and the head office is in Shandong province. The solar energy will be necessary in the future and used widely all over The world , because all the government on the world are trying to get green and new engery from the nature. Especially for the remote countryside,village,downtown,desert,mountain and Seaside，people willl use solar street light much more than electricity street lights, no need cable,no need repair, easily installion. Until now, Most of the India people bought the solar outdoor lights and they like them very much.The solar powered lamps are popular in India. And it is our main market. Luckly, the other countries on the world start using the solar outdoor lighting widely such as Australia,Canada, France, Japan,USA and Thailand. We trust our solar outdoor lighting will be popular on the market all over the world.

  hot Tags : Solar street light solar powered roadway light solar outdoor lights

  Read More
• What are the advantages of solar lights

  Jul 14, 2017

  Solar street light from the solar cell components, lithium batteries, power controller, LED lights. Technical features are: with high power, brightness equivalent to incandescent 150W-250W, 10 hours a day lighting, can be in continuous rain 7 days of normal work; the application of a charge and discharge protection, photosensitive control devices and time control devices Optoelectronic intelligent controller, so that products can effectively save energy, increase the effective lighting time, reduce production costs. 1. Energy saving: solar energy to provide electricity conversion, inexhaustible; 2. Environmental protection: no pollution, no noise, no radiation; 3. Safety: no electric shock, fire and other accidents; 3. Convenient: simple installation, do not need to line or "ripped" dig construction, there is no power to limit power concerns; 4. Long life: high technological content of products, control systems, accessories are international brands, intelligent design, quality and reliable; 5. High grade: technology products, green energy, the use of units to attach importance to science and technology, green image, grade upgrade; 6. Investment: one-time investment and AC equivalent (AC investment from the substation, into the electricity, control box, cable, works), an investment, long-term use; 7. Suitable for: solar energy from nature, so where the sunshine can be used, especially for green landscape lighting equipment, high-grade residential and outdoor lighting, tourist attractions coastal landscape lighting and embellishment, industrial development zones, industrial and mining enterprises street lamps , The major institutions of outdoor lighting.

  Read More
• How to determine the lighting time of the integrated solar street light

  Jul 21, 2017

       The integration of solar street lighting time can be set according to the user's request. For different applications, the integration of solar street light solar panels, battery pack and light module selection ratio is very important. The power of the integrated solar street light has been determined. The greater the power and battery capacity of the solar panel, the longer the lighting time will be, the solar power of the solar panel is 25W and the solar power of the lamp is 10W. 100% bright 5h, 30% bright 14h.         In case of bad weather, such as continuous rainy days, sunshine time is reduced, the integration of solar lights can be based on the specific use of the environment and customer requirements for the design. In general, the experience of continuous lack of light weather, the integration of solar street lights can guarantee 3 to 7 days of lighting time.

  Read More
• Integrated Solar Street Lights Will Become the Leader in Solar Street Market

  Jul 28, 2017

  Solar street lights are now more and more favored by the market, the installation rate is getting higher and higher, solar street lights compared to the traditional outdoor lighting street lights although the price is relatively high, but taking into account the advantages of obvious, or a lot of places have chosen more environmentally friendly energy Solar street lights, as well as wind and solar street lights, solar garden lights, solar lawn, etc., today is sharing the integration of solar street lights. As the name suggests, the principle of integration of solar street lights with the principle of solar street lights is consistent with the use of solar panels during the day to absorb light energy into electricity stored on the battery, the need for work when the battery release power supply light source lighting. Then the integration of solar energy is a whole, Convenient, more operational. But quite a solar street light, the number of solar panels in the light source on the integration of solar street light source is generally not large, the installation height is generally within 6 meters, light source 5-40 watts is more common, if more than 40 watts of light , Then the whole looks very large, coordination degree to be worse. In addition, the integration of solar street lights can be loaded body sensor device, the work mode is more intelligent. Why is the integration of solar street lighting market will become increasingly broad? On the one hand, from Shenzhen Leadray Optoelectronic Co.,Ltd. experience for 12 years, outdoor lighting is the trend of intelligent, integrated solar street lights are more intelligent, naturally optimistic about the market. In addition, the integration itself is relatively separate solar street lights, the entire installation process is more convenient, and even the wires do not need to pick up, just put the light pole fixed, the lamp installed on the basic completion of all the work, and the other low maintenance Also greatly reduced after-sales costs. In such circumstances, the integration of solar street lighting market is bound to be more and more broad, especially for some of the more convenient installation of the project, is undoubtedly a better choice.

  Read More
• Integrated solar street light and split solar street lights difference

  Aug 18, 2017

  1, The structure is different Separate solar street lights on the battery, LED lamp, photovoltaic panels separate, this must be equipped with light pole, the battery buried in the ground, through the poles of the wire, during the day through the photovoltaic panels power storage, power supply to the LED lamp at night, because the battery in the ground , Easy to be stolen. The integration of solar street light battery, LED lamp, photovoltaic panels integrated into the lamp inside, with or without light pole can be. Now there is a deformation of the split-type solar street lights, although the parts are also separated, but the battery will be installed in the poles or LED lamp next to the side of the light pole can be. 2, The technical parameters are different Split solar street lamp technical parameters can be from 10-80W or even higher, such as: the new rural solar street light series, in the configuration, according to the number of watts, the number of days of rain and other technical parameters to the corresponding configuration of the battery, photovoltaic board size, Controller, etc., need to be based on the actual installation to adjust the exposure angle of the photovoltaic panels; integrated solar street lights are now generally wattage 10w, 20w, 30w, 40w several, each based on a long time experiment is the best configuration , Like 3-6 m 20W new rural solar street light. 3, The use of different According to technical parameters Split-type solar street lights are generally applicable to large-scale roads, highways and other places with high demand for lights; integrated solar street lights can be used in streets, districts, factories, rural, county streets, village streets and other places. 4, Maintenance Split solar street lamp all in one repair to be a lot of complex, when the damage occurs, the need for manufacturers to send technical personnel to the local maintenance, repair from the battery, photovoltaic panels, LED lights, wire and other troubleshooting one by one; integrated solar street lights only Lamp unloading, can be returned to the factory.

  hot Tags : Integrated Solar Street Light split solar street lights solar street lights

  Read More
• Things to know before installing the Integrated Solar Street Lights

  Sep 01, 2017

  Enough sunshine is important for any solar light to support normal working, there are 6 Tips you need to know for installing the integrated solar street lights as guidelines of installation. 1.Enough Sunshine for Working Integrated solar street lights could not work without sunshine, please select good quality integrated solar street light like Leadray brand which have high Solar conversion rate to have enough sunshine for the street light working. 2.Consider the application temperature when selecting the solar street light Control system will stop to charge Lithium Battery under 0°C, Our integrated solar street light adopts the long life Lithium battery for storing energy, charging temperature at day time is between: 0°C～+60°C,when temperature goes lower than 0°C ,the control system will stop automatically to protect the battery, and it will revive to charge the battery while temperature goes higher than 0°C. Discharging temperature at night is between: -20°C ～ +60°C, any ambient beyond will take damage to the battery. So please check these factors while selecting the street light. 3.Charge the battery after long time transportation or storage: Battery of the “All in One(integreated) solar street light” can be stored for 6 months period after fully charged. Therefore please examine and charge it periodically after long time transportation or storage to prevent damaging. 4.Make sure the integrated solar street light installed in a position that the solar light can get as much sunshine as possible: When install the lights in Northern Hemisphere, please adjust the solar panel to the South as much as possible to collect maximum sunshine radiation, while install them in Southern Hemisphere, By the same token, keep solar panel to north. At the same time please keep it away from any shadow of houses, trees etc. 5.Keep the solar panel clear: Keep the surface of the All in One solar street light clear with normal detergent to get maximum power generation, clear the dust or tree leaves or any grease. 6.Our All in one solar street lights got IP65 and passed the reliable tests Our all in one solar street lights can be used in the environment of seaside and desert.

  hot Tags : ALL IN ONE SOLAR STREET LIGHT All In One Solar Garden Light Integrated solar street lights

  Read More
• What is time control for Integrated Solar Street Light

  Dec 27, 2017

  Time control is one of the lighting modes that used in the integrated solar street light, it can also be used in the integrated solar garden light and integrated solar billboard light. We set up the data in the controller base on the requirement from customers or according to the practical application, after the integrated solar street light was installed and operated, it will work automatically according to the data we set up. For example: The default of our Leadray Integrated solar street light is “1227”. “1227” means we set up the light to be lit in 1 hour at 30% light on+2 hours at100% light on+ 2 hours at 50% light on+7 hours at 20%. That is to say the integrated solar street light start working from 6pm, and from 6pm to 7pm the street light has only 30% light on; then from 7pm to 9pm, the light will be full brightness(100% light on); From 9pm to 11pm, 50% light on; From 11am to 6am(the next day) 20% light on. The integrated street light will shift from one setting to another automatically(including on and off), we take this way (1hour+2hours+2hours+7hours) as a default because we think this meets the people's movement. But you can request another way like “2226”, just need to consider the power consumption. Welcome to visit our site: szleadray.com. Inquiry us for More!

  hot Tags : éclairage solaire intégré éclairage intégré du jardin solaire lampadaires en gros de l'énergie solaire

  Read More
• Why do we need the time control for integrated solar street light

  Sep 15, 2017

  1. Energy Saving: You don't need the integrated solar street light to be lit all night long from dust to dawn, especially after mid-night there is less people movement. 2. To extend the lighting hours and against the rainy day, if a solar street light lit with full brightness(100% power on) it can only work for 6 hours. But if we use the time control and set up the solar street light with some hours 100% brightness and some 30% and some 50%, etc. The solar street light can work more hours say like 12 hours( all night long). The solar street light must keep some power to against the rainy days. 3. As the integrated solar street light is powered by the solar, and the battery capacity is limited, we need to allocate the consumption of power. You may think that we can increase the capacity of the battery, if you do so, you need more batter units and bigger size of solar panel, in the end, the whole fixture will be larger and heavier which the poles can not stand, moreover, the cost increased definitely. If you are interested in integrating solar street lights, please visit our website> www.szleadray.com

  hot Tags : Solar Street Lighting All In One integrated street lights china all in one street light suppliers

  Read More
• Integrated Solar Street Light With CCTV Camera

  Dec 01, 2017

  Integrated Solar Street Light with CCTV Camera is a new intelligent Solar Street Light Fixture with Monitoring System(CCTV IP Camera). Basically, the monitoring system will upload the signal to the cloud base by WIFI or 4G Sim Card. The users need to download the CAMHI APP on their photos to check or download the video or pictures. With built-in Web Server, support IE Browse and parameters setting. The system supports 6 users to monitor the IP camera at the same time. By using the APP on phone, the users can check the live video and record video, shoot a picture. 32G/64G/132G SD Card supported, Normally, a 32G SD Card keeps 7days record while 64G keeps 14days record and 138G keeps 30days record. IP Camera Data: 2 Mega Pixel 50°Monitoring Angle 5-10meters recommended monitoring distance 6mm Lens Size 1600*1200 Resolution ≥48dB SNR 24Hours Working Password protection Day and Night mode shift freely Street Light Data: Structure: Integrated(All in one) Power Supply: Solar Powered Solar Panel: 18V/80W; 18V/90W Charge time: 6-8hours Light Power available: 20W/30W Luminous Flux: 140Lm/W IP65 Mounting Height: 8-10M Poles diameter: 76-105mm Lighting model: PIR Sensor

  hot Tags : LED Solar Street Light Integrated Solar Street Light ALL IN ONE SOLAR STREET LIGHT

  Read More
• Why is Integrated Solar Street Light Becoming Popular

  Dec 15, 2017

  Integrated Solar LED Street Lights have gained a considerable amount of popularity in recently years. It’s no secret why. Energy Shortage is one of topics that we talked most in nowadays. Solar Energy is the way to go for the future. Integrated Solar Street Light integrated with Solar Panel, LED light sources, rechargeable battery and smart controller, etc. It does not require any electricity or wiring, plug and play, very simple installation and auto on and off. Below you will find the top four reasons why Integrated Solar Street Lights and other integrated Solar Lighting systems are rising in popularity. Environmentally Friendly More and more consumers are beginning to favor companies and retail stores that are kind to the environment. When businesses install integrated solar street light, they can show the lights to their customers, while also saving on energy costs. Stop Relying on Grid Power Natural disasters such as hurricanes, floods, strong thunderstorms can cause failure of power grids. Integrated solar lighting doesn’t depend on grid power. Power is Not Available In remote or rural regions a utility grid doesn’t exist or is very costly to acquire. Any area that is power less and could receive good sunshine can install the integrated solar street light. Some examples of these remote areas that may need lighting could include camping areas, remote hiking spots, mountainous terrain, and off-road sporting event arenas. Cut Costs Integrated solar street light is very easy and simple in installation, and they save a lot of installation cost comparing to the split type of solar street light or normal city power street light. City power street light need to do the wiring and the integrated solar street light does not need to do so, it saves these wiring cost as well.

  hot Tags : Integrated Solar Parking Lot Lights ALL IN ONE SOLAR STREET LIGHT Integrated Garden Lights

  Read More
• How to install the All In One Solar Garden Light

  Dec 28, 2017

  Leadray Optoelectronic Company produce All In One Solar Garden Lights available of 9W/15W/30W, Let’s show you below how to install the all in one solar garden light: Step One: Open the package and check if components are completed as follow: Step Two: Turn on the Switch before installation, Switch up is on and Switch down is off. Step Three: Place the all in one solar garden light to the top of the pole and fasten the screws. Special Note: When install the all in one solar garden light, please choose a position with enough sunshine and the light can get fully exposed. Do not install the all in one solar garden light within the shadow of a tree or wall so that the light can well receive the sunshine.

  hot Tags : Integrated Garden Lights Eco Solar Garden Lights Solar Powered Garden Lights

  Read More