Construction plan for on-site installation of street lights in driving schools Professional undertaking of solar street light projects

April 30, 2024

Construction plan for on-site installation of street lights in driving schools

Shenzhen Leadray Optoelectronic Co., Ltd.

1ã Process flow
Process flow: Measurement and positioning, construction of street lamp foundation, construction of cable well, construction of street lamp cable trench, and construction of cable

Lay a street lamp, install, debug, and self check.

2ã Measurement and positioning

According to the construction drawings and actual site conditions, measure and set out the installation positions of the street lamp foundation, cable well, and cable trench.

3ã Construction of streetlight foundation
The basic position of street lights can be adjusted according to the actual site conditions and specifications. When the lamp post is erected on the sidewalk, The surface of the lamp post foundation is level with the ground;

When the lamp post is erected on the non motorized green partition, the surface of the lamp post foundation should be 0.2 meters lower than the floor surface.

Professional undertaking of solar street light projects

Driving at night on roads with streetlights and good lighting conditions.

Professional street light production factory. Direct supply from manufacturers.

Direct supply from factories. Professional undertaking of solar street light projects.

Numerous successful cooperation cases.

Professional street light production factory. Regular factory.

Shenzhen Leadray Optoelectronic Co., Ltd.

sales@szleadray.com

+86-13424390319