2.3m high lumen solar courtyard light in Bulgaria

Install a 2.3-meter-high solar powered courtyard lamp post in Bulgaria!

The design of the street lamp project takes into account that some areas in Bulgaria are close to the Black Sea and have high air humidity. The bottom of the lamp post in contact with the concrete can be hot-dip galvanized or coated with anti rust paint to avoid corrosion caused by sea breeze and rain.

After installation, calibrate with a level to ensure that the verticality deviation of the lamp post is less than 3 °, and gradually tighten the flange bolts diagonally with a wrench.

The material of the Leadray lamp body is mostly aluminum alloy, which has good heat dissipation and durability, and can extend the service life of the lamp. Some lamp posts are also treated with spray painted paint, which has a smooth surface and is not easy to fade. There are also multiple colors and styles to choose from, meeting the decoration needs of different scenes.

Bulgaria is located in the northern hemisphere, with a latitude range of approximately 41 ° N-44 ° N. When installing, the solar panels need to face due south and the tilt angle should be controlled at 36 ° -49 ° (local latitude ± 5 °) to maximize the reception of direct sunlight.

The height of the 2.3-meter lamp post is moderate, and the solar panel can be directly installed on the top of the lamp post. During installation, it is necessary to ensure that the panel body is unobstructed, avoid the shadows of tall trees and buildings in the courtyard, and ensure at least 6 hours of direct sunlight per day to ensure battery charging efficiency.

Equipped with an intelligent controller, it has functions such as light control and time control.

The light control function can automatically turn on the lights at night and turn off the lights at dawn

The time control function can set the lighting time of the lamps, making it convenient for users to adjust according to their actual needs.

Equipped with intelligent controller, it has the functions of light control, time control, etc.

The light control function can automatically turn on the light at dark and turn off the light at dawn;

The time control function can set the lighting time of the lamps, which is convenient for users to adjust according to the actual needs.

After installation, the lamps shall be continuously charged in the sun for more than 24 hours.

After that, the solar panel can be covered to simulate the night and test whether the lamps are normally on; At the same time, the light control and time control functions are debugged to ensure that the lights automatically turn on at dark and turn off at dawn, meeting the use requirements.

Thank you to the Bulgarian customer for ordering a solar courtyard and choosing Leadray.